32m H-Beam Prefabricated Steel Bridge Project in Tanzania
Project Location: Dar es Salaam, Tanzania
Project Category: Infrastructure – Prefabricated Steel Bridge
Main Structure: Q355B H-Section Steel Girders
Bridge Span: 32 meters
Total Steel Weight: Approximately 45 metric tons
Project Overview
KXD Steel completed the fabrication, export, and delivery of an H-beam prefabricated steel bridge for a client in Dar es Salaam, Tanzania. The bridge was designed to cross a local waterway and accommodate pedestrian and light vehicle traffic.
With a 32-meter span and approximately 45 metric tons of structural steel, the project used Q355B H-section steel girders, high-strength bolted connections, and a two-coat epoxy anti-corrosion system.
The project covered structural steel fabrication, quality inspection, protective coating, export packaging, shipping, and technical support for on-site assembly.
According to the published project record, the bridge was successfully installed and put into use, with positive customer feedback on fabrication quality and the accuracy of the shop drawings.
Project Background: A Steel Bridge for Local Access
The Tanzanian client required a durable steel bridge structure to cross a local waterway while supporting both pedestrians and light vehicles.
The project called for a structural solution that could be fabricated in China, transported internationally, and assembled at the destination with clear installation documentation.
Several requirements shaped the steel bridge solution:
- A 32-meter bridge span.
- Structural members suitable for the client’s specified loading requirements.
- H-section steel girders with dependable load-bearing performance.
- Corrosion protection appropriate for a humid tropical environment.
- High-strength bolted connections for field assembly.
- Export packaging and transportation to Dar es Salaam.
- Technical documentation and installation assistance.
After evaluating suppliers, the client selected KXD Steel for its steel fabrication capability, pricing, and export coordination.

Structural Design: 32-Meter H-Beam Steel Bridge
Q355B H-Section Steel Main Girders
The bridge uses H-beam steel, also known as H-section or wide-flange structural steel, for its primary load-bearing members.
For this project, the main girders were fabricated using Q355B-grade structural steel.
H-section members provide a defined structural geometry with flanges and a web that work together to resist bending and transfer loads. Their application in this bridge was based on the project’s engineering and construction requirements.
The published project specifications identify:
| Structural Parameter | Project Details |
|---|---|
| Bridge Type | H-Beam Steel Structure Bridge |
| Bridge Span | 32 meters |
| Main Girder Material | Q355B H-Section Steel |
| Total Structural Steel | Approximately 45 metric tons |
| Connection System | High-Strength Bolted Connections |
| Design Loading | Client-specified local standards |
| Project Destination | Dar es Salaam, Tanzania |
The source record does not provide a numerical design load, bridge deck width, girder dimensions, or detailed structural calculations. These values are therefore not stated here.
High-Strength Bolted Connections
The bridge was designed with high-strength bolt connections to facilitate assembly at the construction site.
For an internationally shipped steel structure, connection detailing is an important part of fabrication and installation planning. Components must correspond to the approved shop drawings so they can be correctly positioned and connected.
KXD Steel supplied assembly drawings and installation instructions to support the client’s erection work.
Corrosion Protection for Tanzania’s Humid Climate
The bridge was intended for a tropical destination where humidity is an important consideration for exposed steel structures.
The specified protective treatment consisted of:
Surface preparation: Shot blasting to Sa2.5.
Protective coating: Two coats of epoxy anti-corrosion paint.
Quality inspection: Coating thickness checked and documented before shipment.
This treatment was selected to provide corrosion protection for the project’s environmental conditions.
The published record does not state the exact dry film thickness, coating brand, or guaranteed coating service life.

Fabrication and Quality Control
All major steel bridge components were manufactured at KXD Steel’s fabrication facility before export to Tanzania.
The project record identifies several quality control activities performed during production.
Raw Material Verification
Mill certificates for incoming structural steel were checked to verify the supplied material before fabrication.
The main girder material was specified as Q355B steel.
Dimensional Inspection
Fabricated components were checked against the approved shop drawings.
Dimensional inspection was particularly important for the bridge’s bolted connections and the fit of its structural members during site assembly.
Welding Inspection
Certified welders carried out fabrication welding.
Weld quality was checked through visual inspection and ultrasonic testing (UT), as stated in the original project documentation.
Surface Coating Inspection
After shot blasting and the application of the protective coating, coating thickness was inspected and documented.
Final Pre-Shipment Inspection
A final dimensional inspection report was issued before the steel components were dispatched.
These checks supported traceability and helped the client verify the condition and conformity of the fabricated steel bridge components before international shipment.
Export Packaging and Delivery to Tanzania
Shipping prefabricated steel bridge components over a long ocean route requires careful identification, securing, and documentation.
For this project, KXD Steel prepared the structural members and connection materials for shipment from China to Dar es Salaam Port.
The documented export packaging included:
- Steel structural members bundled and secured with steel strapping.
- Bolt sets and connection plates packed separately.
- Desiccant included with the boxed connection materials.
- Packing lists and shipping marks prepared for identification.
- Weight and dimensional documentation prepared for customs procedures.
The shipment was described as FCL (Full Container Load) transportation to Dar es Salaam Port, Tanzania.
The original project record also identifies DAP Dar es Salaam as the agreed delivery term.
This export preparation was intended to protect components during transport and provide the receiving team with the information needed to identify materials and organize subsequent assembly.
On-Site Assembly and Technical Support
After delivery, the client’s construction team was supported with installation documentation.
KXD Steel supplied:
- Detailed assembly drawings.
- Installation instructions for structural components.
- Remote technical assistance during the installation phase.
The high-strength bolted connection system was intended to support field assembly of the fabricated bridge members.
Remote communication enabled the client to consult KXD’s technical team during erection.
The original project record confirms that installation support was provided remotely.
Project Outcome: A Completed Steel Bridge in Tanzania
According to the published project report, the 32-meter H-beam steel bridge was successfully installed and put into use.
The client provided positive feedback regarding the fabrication quality of the steel structure and the accuracy of the shop drawings.
The completed project demonstrates KXD Steel’s experience with an international steel bridge supply process involving:
- Q355B H-section structural steel fabrication.
- Shop drawing coordination and dimensional control.
- Welding and ultrasonic inspection.
- Shot blasting and epoxy anti-corrosion coating.
- Export packaging and shipment to East Africa.
- Remote technical support for site assembly.
The project also serves as a reference for buyers evaluating fabricated steel bridge structures for local infrastructure access.
What This Project Shows About Prefabricated Steel Bridge Delivery
The Tanzania project provides a practical example of how a prefabricated steel bridge can be delivered through coordinated engineering, fabrication, inspection, and international transportation.
For infrastructure contractors and project developers, the main considerations illustrated by this project include:
Fabrication accuracy: The bridge components were manufactured and inspected against approved shop drawings.
Material traceability: Raw material mill certificates were checked before fabrication.
Corrosion protection: The surface preparation and epoxy coating system were specified for the project’s environmental conditions.
Export readiness: Steel members, connection materials, and shipment documents were organized for international delivery.
Assembly documentation: Drawings, installation instructions, and remote technical assistance were provided to support construction at the destination.
Each bridge project must ultimately be evaluated according to its own span, loading conditions, site environment, and applicable engineering requirements.
Frequently Asked Questions
1. What was the span of the prefabricated steel bridge exported to Tanzania?
The bridge had a span of 32 meters. It was designed to cross a local waterway and support pedestrian and light vehicle traffic.
2. What steel grade was used for the main bridge girders?
The main girders were manufactured from Q355B H-section structural steel.
3. How much steel was used in the Tanzania bridge project?
The published project specifications report a total structural steel weight of approximately 45 metric tons.
4. What corrosion protection was applied to the steel bridge?
The steel components underwent shot blasting to Sa2.5, followed by a two-coat epoxy anti-corrosion paint system. The coating thickness was inspected and documented before shipment.
5. How were the prefabricated bridge components delivered?
The structural steel components were packed and transported by FCL shipment from China to Dar es Salaam Port, Tanzania. Bolt sets and connection plates were packed separately.
6. Did KXD Steel provide installation support for the bridge?
Yes. KXD Steel provided detailed assembly drawings, installation instructions, and remote technical assistance throughout the installation phase.
Explore Our Steel Bridge and Infrastructure Solutions
This Tanzania project is one example of KXD Steel’s steel structure fabrication and international export experience.
For contractors, infrastructure developers, and project procurement teams evaluating a prefabricated steel bridge, the following information is useful for an initial engineering discussion:
- Required bridge span and width.
- Intended pedestrian or vehicle use.
- Project location and site conditions.
- Applicable design codes and loading requirements.
- Environmental and corrosion protection requirements.
- Available drawings or technical specifications.
- Delivery destination and installation support requirements.
Planning a Steel Bridge Project?
KXD Steel provides steel structure design coordination, fabrication, inspection, export delivery, and technical support for international projects.
Share your bridge drawings and project requirements with our team to discuss a suitable structural steel solution.
Request a Custom Steel Bridge Quotation.